此机使用三相电源:最大功率15KW

规格:长4.2m*宽1.15m*高2.02m(含模温机)

一出六高速滚轮机:此机广泛用于半导体和精密载带方面的生产(例如;微电感、微晶振、微电容、微电阻、及半导体等电子承接带)，是一款高精度机型，此机型全尺寸可达到+0.03mm--0.05mm之间、机器单条出带速度可7--10米/分钟，(根据成型产品难度而定)机器生产产品品质要求高、产率快、操控性好、美观、大气等优点，也可解决粒子机的缺陷、产品表面有颗粒和带面厚度不均不好封合的现象。

这款机型与粒子机相比，有显著的性价比和品质优势、滚轮机生产的裁带表面无颗粒，带面厚度均匀，封合良好。整体机型外观美观大气，迭代配置上现代气息掀盖式设计门，增加了机器的美观，整洁，安全防护，且有着最大限度的隔音功能。此设备可生产 W8x4、W8x3、W8x2、W12x4、W12x3、W12x2、W16x3、W16x2 载带产品。

This machine uses a three-phase power supply: maximum power of 15KW Specification:length 4.2m * width 1.15m* height 2.02m (including mold temperature machine) One out sixhigh-speed rolling machine: This machine is widely used in the production of semiconductorsand precision tapes (such as inductors, microcrystals, microcapacitors, micro resistors, andelectronic tapes for semiconductors), and is a high-precision model. The full size of thismodel can reach between + 0.03mm and 0.05mm, and the machine's single tape outputspeed can be 7-10 meters/minute (depending on the difficulty of foming the product). Themachine has the advantages of high product quality requirements, fast yield, goodcontrollability, beauty, atmosphere, etc. it can also solve the defects of particle machines.particles and tape surfaces on the product surface, The phenomenon of uneven thicknessand poor sealing.

Compared with particle machines, this model has significant cost-effectiveness and qualityadvantages. The carrier surface produced by the rolling mill is particle free, the thickness ofthe belt surface is unifom, and the sealing is good. The overall appearance of the model isbeautiful and atmospheric, with a modem style flip up design door that enhances themachine's aesthetics, cleanliness, safety protection, and maximum sound insulation functionThis device can produce W8x4, W8x3, W8x2, W12x4, W12x3, W12x2, W16x3, W16x2 carierproducts.